Monsterlabo has Firing An updated version of its signature status, monster. BIT-Tech was reported about a very modern repetition of the monster, in March, when designed with AMD Ryzen 3800x and Nvidia GeForCe RTX 3080, and showed Microsoft Flight Simulator 2020. 65 ° C.
Monsterlabo has now launched a “updated design”, which is said to accommodate a set of graphics cards, and provides more exclusive customization options for Indiegogo, as well as pre -erected machines. Just like the previous version of the monster, the new model depends on the heart (in fact, it is now the heart2) For its negative magic. This negative cooling block occupies about half of the structure space and is divided between the front and back, – the CPU and the other takes care of the graphics processing unit.
I have reviewed the specifications of the heart2And it seems that it is the same in terms of sub -components and cooling capabilities, so I am not sure of the changes that the second Gen name gain. Specifications can be found below:
- 2x intainsks (3 kg each) negatively cools the electronics,
- 20 x 6 mm heat tubes, 10x per slide. Hell yes, we know, not bad for the computer!
- 6X copper banks that connect the heat room to the 6 mm front and rear aluminum panels for the improvement of the beneficial thermal width.
I think one of the most modern improvements to the monster is to cooperate with EKWB in the heat -sample; For memory, to obtain the level of graphics processing units with TDP> 220W.
The optimal technology recently I built a system Based on the latest version of the monster, install the Intel i9-10900K (for the challenge challenge) that works at 89 ° C at 4.5 GHz and 1.13 volts on all ten cores, while the RTX 3080 graphics processing unit in Burner was modified on a stable load of 80 ° C under pregnancy, with a light light (with a spot 150-200MHz.
To keep the construction completely silent, I used the Tech Optimum Silverstone Nightjar Psu. It also recommends the excessive “VRM” section, with decent heat matches on heat generation components such as VRMS.
One of the new aspects of Indiegogo’s campaign is to provide color finishes. When you choose project support, you will be able to select an additional function for a custom color. “We will take care of the painting,” says Monsterlabo. Moreover, it adds the option to engrave the designated logo, as well as the standard unit number and the serial number that will see it around the back.
Pre -built models from 2,850 euros
Last but not another, when the additional services path is decreased, Monsterlabo has some pre -designed options (starting from 2,850 euros), or you will even assemble you from the ingredients supplied with some “improvement without a fan”, applied by their technical people.
You can support the monster and you should expect a structure by Christmas (1 left at the time of writing this report) for 790 euros. If you missed, the next batch aims to issue Easter (Shipping April 2022) with 197.