Manufacturer: Silentiumpc
UK price (as reviewed): £ TBC (INC. VAT)
US price (as reviewed): $ TBC (Exc Tax)
Silentiumphc was not a company you were aware of or perhaps he was aware of it at all before this review. A creature of usually I will often liquidate the manufacturer of those I know or use before. This can be a good thing because you are likely to get a well -quality product, but you have to be careful not to allow the brand loyalty to crawl when companies allow standards, and some wonderful products may be missed. Silentiumc offers to the most suitable ending end of the spectrum and with most models that express three or four fans from the box, they also reduce any need to buy additional cases fans. Despite the low price, the Silentiumpc package cases with many creature amenities as with fans, similar to how to fill the basic models of smaller car companies with expensive add -on options with other “distinct” brands. Let’s see if the RGNUM RG6V TG, the Polish designer is one to see it, or one is absent from it?
For the budget condition, it is well filled, while protecting a separate piece of foam for the glass plate. This did not happen to me before, manufacturers have a more position on the transfer of glass, with no more protection with any of the glass cases that have passed through my hand. At least it is not the best of my memory.
The issue is fun enough to look at. It is mostly your typical black box, but the front plate has a sharp angle pulp in the middle of the road, a frequent and lower pattern by the heat distance from a thin hexa grille of black shine that provides the condition for air supplies. It is an aggressive position that reminds me of the back channels on the current lamborghinis. In the middle of that front network, a small emblem with an inhibited “S” is located as a Silentiumpc logo.
The front, ceiling, floor, and back of the box are well activated, with the presence of the previous three, all of them filters for some description. The plastic front panel is connected to the solid structure with a few payment pins, and it is released without a lot of noise. This has become easier by input/front output in the metal plate of the roof instead of the front plastic section. This front section is in two parts; Frequently muffled external frame attached to the box, then a dual -layer central plate.
The ventilation includes a hexagonal network on the front, with a 12 mm -like fabric filter, both permanently connected to the framework of this inner section. The filter often makes permanently fixed in this way the cleaning is difficult, but the two parts are connected by the magnets that are inserted into both tires, so that the refinery plate can be removed from the front alone in order to rinse and spin. It is a very elegant and smooth solution and reduces the front of ugly filters frames.
Behind the front panel, three Signiumummpc fans sit from Sigma HP120. They were installed to the outer part of the front fan bars, but the bars were inserted, so there are 17 mm of breathing space between the candidate and fans. Fans look at the first part of the first examination, which is an elegant 9-bladed fan with the Silentiumpc logo in the center of the axis, and slogans that also feel hard. However, when the fan blades are given pressure, it reveals a somewhat rough end on the edges of the blades.
The interface can also install 2 x 140 mm fans and even 360 mm radiator with a thickness of 60 mm, but that is, with a gin will eat in your GPU clearance. It can take 2x 120 mm or 140 mm fan mountain and up to 280 mm. Silentiumphc determines that the 280 mm cooler is only with fans with a thickness of 25 mm and Rad from 28 mm, but given that I measured the gap to the VRM cooling room as 52 mm and you must also scan EPS and I/O front cables, will be incredibly narrow. Possible, but it is not really recommended.
The ceiling and the lower side of the magnetic sports filters. I like the idea of using a magnetic filter below because it means removing it for cleaning from any direction. The bottom of the box is ventilated directly in front of the rear feet, even where the removal of the front cooler ends, so the air flow to the entire floor provides not only PSU.
Then the fourth Sigma HP120 fan is found in the back of the box, which has 16 mm travel between the top and the lowest installation sites. Only 120 mm of fans and radiators can be installed in the depth.
The I/O front is the power buttons and resets them, a separate headphone and microphone ports, USB 3.2 Gen 1 Type-A. UsB 2 sockets are directed for some reason in opposite ways … only to make sure your USB device is connected to a thousand try. Given that all the pictures of the case on the site show them a confrontation of the same direction, I can only assume that this is a manufacturing error that goes beyond quality control. Both are still functional despite the inclusion of rubber cooking plots for both sound and USB ports.
to set
- Dimensions (mm) 221 x 443 x 470 (WXDXH)
- material Steel, plastic and trenched glass
- Available colors Black with standard ARGB lovers
- weight 6.05 kg
- Front plate Energy, reset, 2x USB 3.2 Gen 1 (Type A), 1x headphone socket 1x microphone
- Bay 4 x 3.5 “/2.5”, 5 x 2.5 “
- Figure factor (s) ATX, Micro -atx
- refrigeration Front fan holders 3 x 140 mm/120 mm (distorted 3 x 140 mm), 1 x 140 mm/120 mm rear fan pregnant (1 x 140 mm included), 3 x 120 mm or 2 x 140 mm of ceiling fan holders (the fans are not included)
- Central processing unit cooling clearance 180mm
- The maximum graphics card length 419mm
- Add -on Removable dust filters, RGB LED control unit, PWM fan axis eight conditions